proteus仿真时报错:[SPICE] Too many iterations without convergence. 翻译一下: 其实前缀:[SPICE]是重点,把SPICE模型的器件(一般是三极管、运放一类的)改成Schematic Model(原理图模型&#…
一、问题:在利用Proteus仿真时,经常会遇到[SPICE] Too many iterations without convergence(太多没有收敛的迭代)这个提示,致使仿真进行不下去,通过设置System-Set Simulation Options的Set Better Conver…
问题描述 在使用python的modbus_tk库,通过modbus tcp连接PLC时的一个报错:
Error while flushing the socket: flush_socket: maximum number of iterations reached报错原因
PLC 在设置时会有以太网连接数的设置,当发起的连接数超过PLC设置…