相关文章

ETC1+Alpha纹理压缩自动化脚本

尊重原创,转载请在文首注明出处:http://blog.csdn.net/cai612781/article/details/78798054 一,压缩方式 我们在Unity中对于图集和纹理,常用的压缩方案按照质量从低到高可以分为: 高压缩:Android:ETC1Al…

ETC1压缩纹理格式详解

本来以为,ETC1作为Android 设备的OpenGL标准,开源且最常用的的一种压缩纹理格式,总会有人去翻译一下khronos的文档,读一下代码,给大家作个普及的,不料就是搜不到。没办法,尽管英文不好&#xff…

ETC1压缩算法详解

0. Ericsson 压缩算法官方 GitHub ETCPACK 1. 基本思想 ETC 压缩算法的基本思想 将图片分成 4x4 的若干个像素块,每个像素块按照一定规则编码成为一个 64 位(8字节)的数据,大概的想法是计算像素块的平均颜色,然后记录这个平均颜色和每个像素…

【FPGA】 Robei EDA的使用(12)—— 利用实现图像处理的伽马矫正

天下凡人皆庸于懒,天下才子皆毁于傲。 自30号初赛作品提交之后,本来要在实验室准备电赛培训,然后一边等着结果出来,奈何身体不好,学校线下之后,几乎天天与实验室为伍,到了6月份,光通…

[A]. 总结2.组件协作:模版方法模式,策略模式,观察者模式

总结2. 模版方法模式,策略模式 GOF设计模式--23种模式的分类重构获得模式 Refactoring to patterns模版方法模式 (Template Method)策略模式 (Strategy)观察者模式(observer / Event) 声明&…

Establishing a tunnel via proxy server failed;

开发中偶然遇到的websocket错误“webSocket connection to ws://x.xx.xx.x:xxxx failed: Establishing a tunnel via proxy server failed; ”; 起初不知道问题所在,后经发现是由于开了浏览器代理服务器的原因造成的,解决方案很简单,处理代理…

成功解决:ubuntu安装nginx时报错Failed to start A high performance web server and a reverse proxy server.

原因是因为之前卸载nginx时没卸载干净,导致此错误,执行以下指令清除干净后安装即可 sudo apt-get remove nginx nginx-common sudo apt-get purge nginx nginx-common sudo apt-get autoremove sudo apt-get remove nginx-full nginx-commonsudo apt-ge…

Apache 502 The proxy server 解决办法

Apache 使用代理出现The proxy server received an invalid response from an upstream server.The proxy server could not handle the request GET /.Reason: DNS lookup failure for: xxx.xxx.com错误,解决办法: 在apache配置文件中的httpd.conf或vho…

代理服务器proxy server

代理服务器proxy server In computer networks, a proxy server is a server (a computer system or an application) that acts as an intermediary for requests from clients seeking resources from other servers. 在计算机网络中,代理服务器是用户和网络服务…

selenium启动chrome时Proxy server需要验证用户

说明一下,本文的情景是“代理服务器需要验证用户名和密码”,至于“只需设置代理服务器地址”的情况请另行搜索 Step1.新建一个util模块 import string import zipfiledef create_proxyauth_extension(proxy_host,proxy_port,proxy_username, proxy_pass…

Proxy server got bad address from remote server

在ArcMap中,在GIS Servrvers中,打开已经设置好的服务器时,出现下面的弹窗问题。 Proxy server got bad address from remote server(verify the server is running) 解决办法:如果关闭服务器上的防火墙&…

Failed to start The nginx HTTP and reverse proxy server.

问题:nginx端口被占用 Failed to start The nginx HTTP and reverse proxy server.一直kill -9 端口号都不行 后来才发现nginx杀不掉: 运行 killall -9 nginx就可以了

ubuntu安装nginx报错:Failed to start A high performance web server and a reverse proxy server

环境 系统: 阿里云Ubuntu18.04 TLS nginx版本: 1.14.0 问题描述 出于某些原因,nginx来来回回装了好几遍,最后出现的这个报错: Failed to start A high performance web server and a reverse proxy server 完整报错信息如下: $ systemctl status nginx * nginx…

【报错】Failed to start A high performance web server and a reverse proxy server.

文章目录 报错原因解决 报错 Failed to start A high performance web server and a reverse proxy server. 原因 之前卸载nginx时没卸载干净,导致此错误,执行以下指令清除干净后安装即可 解决 sudo apt-get remove nginx nginx-common sudo apt-get…

Linux中安装或开启nginx报错Failed to start A high performance web server and a reverse proxy server.

出现如图所示错误,而且使用ss -nat命令查看服务时也没有出现nginx的80端口 我的解决办法是把原先的nginx卸载掉 sudo apt-get remove nginx nginx-common sudo apt-get purge nginx nginx-common sudo apt-get autoremove sudo apt-get remove nginx-full nginx-…

Linux配置Nginx报错Failed to start The nginx HTTP and reverse proxy server

过程 问题描述安装过程如下 分析问题解决问题永久关闭selinux重启整个系统重启Nginx 问题描述 需要给一台http服务器配置nginx,最终想要使用https访问到这台http主机。 配置过程:https://blog.csdn.net/zhengaog/article/details/119485385?spm1001.20…

Android SDK Manager设置HTTP Proxy Server代理服务器

1 Tools -> Options... 2 设置代理地址 HTTP Proxy Server:mirrors.neusoft.edu.cn HTTP Proxy Port:80 3 Packages -> Reload

Android http proxy server 设置

在安装Android studio SDK时经常遇到下面的情况 点击图中的tool-Options,进入界面并进行设置如图 在Android SDKManager Setting 窗口设置HTTPProxy server和HTTPProxy Port这个2个参数,分别设置为: HTTPProxy server:mirrors.neusoft.edu…

The proxy server is refusing connections 怎么解决呢?

The proxy server is refusing connections这个多出现在你安装了代理服务器以后,如果你没有启动代理,那么就会上不了网, 1.解决方法针对的是firefox浏览器:首先点击右上角的按钮进入到preferences里面来。 2.然后在general里面点…

踩坑记录——ProxyServer删除问题经验分享

ProxyServer删除问题 最近在写爬虫的时候碰到“由于计算机积极拒绝,无法连接”的问题,之前我就遇到过一次,是由于用了V P N才导致代理被修改。 它会在注册表“计算机\HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Interne…