老化测试一般复位40次本文档提供39次和40次复位脚本适用vector CANoe可直接套用改下面代码中的“CDD”变成你项目CDD的名字即可。39次复位/*!Encoding:936*/ includes { } variables { int i; const long SendTimeout 5000; //等待最大的发送超时时间 const long ReceiveTimeout 5000; //等待最大的接收超时时间 } void MainTest() { reset39(); } testcase reset39() { for(i1;i40;i) { diagRequest CDD.Hard_Reset_Reset PHY_1101; testwaitfortimeout(200); if(1Send_DiagRequest_diag(PHY_1101)) { write(已复位 %d 次,i); } else { write(ERROR); } } } long Send_DiagRequest_diag(diagrequest *DiagReq) { long retVal; TestReportWriteDiagObject(DiagReq); //打印发送诊断 diagSendRequest(DiagReq); //请求诊断发送 if(1TestWaitForDiagRequestSent(DiagReq, SendTimeout)) //等待诊断发送成功 { write(Request was sent successfully); TestStepPass(Request was sent successfully); if(1TestWaitForDiagResponse(DiagReq, ReceiveTimeout)) //等待诊断有响应 { TestReportWriteDiagResponse(DiagReq); //打印诊断接收 write(Request with response); TestStepPass(Request with response); retVal DiagGetLastResponseCode(DiagReq); if(-1retVal) //有正响应 { write(Positival response received); TestStepPass(Positival response received); } else if(0retVal) //有负响应 { write(Negative response received%X,retVal); TestStepFail(Negative response received); return retVal; } else { write(No response has been received yet); //目前尚未收到任何答复 TestStepFail(No response has been received yet); return 0; } } else //诊断超时无响应 { write(Request with no responseThe timeout was reached); TestStepFail(Request with no responseThe timeout was reached); return 0; } } else //诊断发送失败 { write(Request could not be sent); TestStepFail(Request could not be sent); return 0; } return 1; }40次复位/*!Encoding:936*/ includes { } variables { int i; const long SendTimeout 5000; //等待最大的发送超时时间 const long ReceiveTimeout 5000; //等待最大的接收超时时间 } void MainTest() { reset40(); } testcase reset40() { for(i1;i40;i) { diagRequest CDD.Hard_Reset_Reset PHY_1101; testwaitfortimeout(200); if(1Send_DiagRequest_diag(PHY_1101)) { write(已复位 %d 次,i); } else { write(ERROR); } } } long Send_DiagRequest_diag(diagrequest *DiagReq) { long retVal; TestReportWriteDiagObject(DiagReq); //打印发送诊断 diagSendRequest(DiagReq); //请求诊断发送 if(1TestWaitForDiagRequestSent(DiagReq, SendTimeout)) //等待诊断发送成功 { write(Request was sent successfully); TestStepPass(Request was sent successfully); if(1TestWaitForDiagResponse(DiagReq, ReceiveTimeout)) //等待诊断有响应 { TestReportWriteDiagResponse(DiagReq); //打印诊断接收 write(Request with response); TestStepPass(Request with response); retVal DiagGetLastResponseCode(DiagReq); if(-1retVal) //有正响应 { write(Positival response received); TestStepPass(Positival response received); } else if(0retVal) //有负响应 { write(Negative response received%X,retVal); TestStepFail(Negative response received); return retVal; } else { write(No response has been received yet); //目前尚未收到任何答复 TestStepFail(No response has been received yet); return 0; } } else //诊断超时无响应 { write(Request with no responseThe timeout was reached); TestStepFail(Request with no responseThe timeout was reached); return 0; } } else //诊断发送失败 { write(Request could not be sent); TestStepFail(Request could not be sent); return 0; } return 1; }